Alloy and steel wheels for Ford Mondeo

Change the model

Search for a vehicle type

Vehicle not found

Provide

Try the rims on your car

Ford Mondeo

The Ford Mondeo is one of the flagship passenger cars from the American brand, Ford. It has been available on the European market—and beyond—since 1993. Classified in the D-segment, the Mondeo represents the category of comfortable mid-size vehicles. Interestingly, the sedan version introduced in 2022, marking the sixth generation, is considered part of the upper mid-size segment, offering premium features and design.

Original Wheels for Ford Mondeo – Bolt Pattern, Width, Diameter

When choosing new wheels for your Ford Mondeo, it's crucial to ensure they meet specific technical requirements. While aesthetics are important, the key factors are the technical specifications, which determine proper fitment and safe installation. All manufacturer-recommended values are based on extensive research and testing, so they should always be followed for optimal performance and safety.

What Is the Typical Wheel Diameter for the Ford Mondeo?

There is no single standard wheel size for the Ford Mondeo. In the earliest models, the smallest available diameter was 14 inches. With the introduction of the third generation and beyond, 16-inch wheels became the minimum size. Today, popular options include 17-inch and 18-inch wheels. The largest factory-installed wheels have a diameter of 20 inches.

What Is the Bolt Pattern for Ford Mondeo Wheels?

The bolt pattern has remained relatively consistent across all Ford Mondeo generations. For the first two generations, produced until 2000, the bolt pattern was 4x108. From the third generation onward, it changed to 5x108, adding an extra mounting bolt while maintaining the same bolt circle diameter.

What Is the Width of Original Ford Mondeo Wheels?

The narrowest factory wheel width is 5.5 inches, found on the 14-inch wheels used in the first and second generations. The widest is 9 inches, which was available in the fifth generation of the Mondeo.

What Is the ET (Offset) for Ford Mondeo Wheels?

The ET (offset) value determines how far the wheel sits inside the wheel arch. A lower ET means the wheel sticks out more. For the Ford Mondeo, the minimum offset is 35 mm. The maximum offset is 50 mm for generations 1 through 4, and up to 55 mm for later generations.